The EnStationAC from EnGenius is specifically designed and engineered to network over great distances and to transfer heavy data at consistent wireless speeds in point-to-point or point-to-multi-points deployment.
It is engineered with a power independent RF interface that offers bandwidth up to 866Mbps on 5GHz band for accommodating heavy traffic services, it also has two Gigabit ports where the main port will accept a 48v 802.3at PoE and from the secondary port another device can be powered via an 802.3af PSE output.
The EnStationAC is in an IP55-rated enclosure designed to withstand harsh environment conditions including severe and prolonged exposure to sunlight, extreme cold, frost, snow, rainfall, hail and humidity. It is easily mounted on a wall or to a pole with its three-axis position which is especially useful in aligning to a matching EnStationAC unit.
EnStationAC supports blazing fast 802.11ac wireless speeds to 867 Mbps on the 5 GHz band for accommodating 4k Ultra High Definition (UHD) video and heavy multi-application traffic services with extended bandwidth over a wider channel range (20MHz, 40MHz and/or 80MHz) allowing network managers to fine tune channel usage based on the application.
With its secondary 802.3af-compliant PoE pass-through Gigabit port, EnStationAC connects and powers an additional PoE-compatible device like a remote IP surveillance camera or AP for greater deployment flexibility and convenience. Easily position EnStationAC for maximum connectivity with its 360-degree, 3-axis pivoting arm that locks in place, ensuring precise alignment between other EnStationAC devices.
EnStationAC is ideal for Point-to-Point (PtP) applications over short or long distances where cabling is not possible or practical. Longer ranges can be achieved when paired with another EnStationAC in a PtP deployment by aligning their dish-shaped, 19 dBi dual-polarized, high-gain antennas to face each other, ensuring each gets the full impact of the narrow-focused, wireless beam, reducing frequency interference over long distances.
Deploy the EnStationAC where power outlets are scarce or unavailable, such as under the eaves of roofs, high atop light poles or in other remote locations up to 328 feet away. Power the unit via the included passive 54v Gigabit PoE adapter (EPA5006GP) while protecting valuable network equipment from power surges or short-circuits associated with lightning strikes and electrostatic discharge (ESD).
EnStationAC supports three (3) operation modes — Access Point, Client Bridge, and WDS Bridge mode. This flexibility makes the Access Point/Client Bridge a versatile solution for IT managers who may need to update or reconfigure their deployments, as their network needs change.
Designed to perform in harsh environments, EnStationAC features IP55-rated waterproof and dustproof casing that ensures it can withstand harsh outdoor climates and indoor industrial environments. This includes prolonged exposure outdoors to sunlight, extreme cold, frost, snow, rain, hail, heat and humidity, and indoors where temperature may be a factor.
|Wireless Radio Specification||
- Maximum 866Mbps
- Maximum power is limited by regulatory power
Support Radio Technology
- 802.11ac/a/n: Orthogonal frequency-division multiplexing (OFDM)
- 802.11n/ac: 2x2 MIMO with 2 streams
- 802.11ac with 20/40/80 MHz channel width
- 802.11n with 20/40 MHz channel width
- 802.11a with 20MHz channel width
- 802.3at/48V proprietary compliant source
- Active Ethernet (Power over Ethernet, PoE)
Directional High gain antenna
- 19dBi 5GHz antenna
- Wide range from 5150~5925MHz
- Dual Polarisation
Two 10/100/1000 BASE-T Ethernet Port
- Main port supports 802.3at/proprietary 48V PoE Input
- 2nd port supports the 802.3af PSE output
- One reset/reboot button
Access Point/Client Bridge/WDS
- A variety of operation modes to serve multiple constituencies and applications
- WDS: WDS AP/WDS BR/WDS STA
Physical & Environment
|Dimensions||190 (d) x 38 (h) mm|
|Firmware for this product should only be sourced via the EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware.||EnGenius Networks Europe B.V. Downloads Site||27.10.16|
|Simplified AP Monitoring & Management
For easier monitoring and maintenance after deployment on rooftops and other hard to reach places, users can monitor the Access Point remotely with SNMP-based EZ Controller wireless Access Point software for Windows, Mac OSX, and Linux.
|'EnGenius WDS Bridging Setup Guide' - an explanation of WDS modes and a configuration guide||Download here||18.02.16|